The Gerber file is a file exported from the PCB file. The content of this file covers the Pad layer (pad layer), the solder mask layer, the silk screen layer, and the stencil layer. Therefore, the factory needs to use the Gerber file to make it. However , some companies’ products are still in the R&D stage, and Gerber files are unwilling to be known, and they are worried about being plagiarized, but some of the Gerber data files is required during production. Leaving the files which factory needs,and deleting the others may be a good choice.
The BOM (Bill of Material) bill of materials is a detailed description of the material, a file corresponding to the actual products one-to-one, and is the standard document for the factory material incoming and the standard document for the production procedure.
The coordinate file (Gernerates pick and place files) describes the location information of the device. It needs the extension to be in .txt or Excel format; It needs to include the origin of the PCB. The origin is generally designed in the lower left corner.
The bit number map is the location of the pad and silk screen layer, and it is used to check whether the SMT material placement is correct.
XPCB Limited is a premium PCB & PCBA manufacturer based in China.
We specialize in multilayer flexible circuits, rigid-flex PCB, HDI PCB, and Rogers PCB.
Quick-turn PCB prototyping is our specialty. Demanding project is our advantage.
© 2023 - XPCB Limited All Right Reserve