From the perspective of signal traces, a good PCB layering strategy should be to put all signal traces on one or several layers, and these layers […]

XPCB Limited recently encountered the problem of component tilting when doing SMT chip processing for customers. The situation is as shown in the picture. This component […]

3. Printing 　　 Printing is also a very important part. 　　 (1) Type of squeegee: There are two types of squeegee: plastic squeegee and steel squeegee. […]

SMT chip processing short-circuits defects mostly occur between the pins of fine-pitch ICs, so it is also called “bridging”. There are also very few short-circuits between […]